Axis 25733 Instruções de Operação

Before attempting to connect or operate this product,please read these instructions completely. Product Instructions25733 & 2573581-IN621003/28/07

- 10 -14. Now grab the camera assembly and connector the RJ45 cable and the input cable to the camera.15. Now attached the camera assembly to the hous

- 11 -Installing Axis 233 Camera1. Note the position of the mounting holes on the camera bracket (see diagram below). 5. Turn the camera counter clo

- 12 -The unit is setup with (2) individual power inputs. 1. Accessory Power (yellow and green wire) 2. Camera Power (red and orange)If you wish

- 13 -Set screwsFigure 4INSTALLING THE HOUSING ASSEMBLY:1. This unit includes a 1½" NPT housing for a standard 1½" NPT pipe. The hous

- 14 -213546798Exploded View for Replacement Parts 1415

- 15 -Part Number Description1RPFD7501 LOWER TRIM RING (Long)225740TINTED REPLACEMENT CAPSULE25741CLEAR REPLACEMENT CAPSULE3 RPFD703 DOME CLAMPING BRA

- 2 -!!SAFETY PRECAUTIONSIMPORTANT SAFEGUARDS1. Read Instructions - All the safety and operating instructions should be read before the unit is opera

- 3 -!ELECTRICAL SPECIFICATIONS (OUTDOOR ONLY):NOTE: This unit is designed for operation in an upright position. Installing the unit upside down may

- 4 -2. In the kit there are (8) aluminum spacers - (4) 1" and (4) ½". Thread (2) spacers - (1) 1" and (1) ½" - on top of each

- 5 -Connect the power plug and the ethernet cable to the back of the camera.CAMERA POWER+12 VDC -12 VDCFor Model 21893 onlyIf alarm connections are n

- 6 -Installing Axis 214 Camera2685 Mounting Plate:Attach camera using these (3) holes1. Install the AXIS 214 camera to the 2685 mounting plate using

- 7 -Installing Axis 231D/232D Camera1. Install the camera onto the quick release bracket. Loosen one of the screws on the bottom of the camera, see

- 8 -Installing Axis 231D/232D Camera (cont.)7. Then start (3) 8-32x3/8” plillips head screws onto the 3 inch spacers inside the housing. Be sure to

- 9 -12. Make wiring connections to connector block assembly per camera instructions.Installing Axis 231D/232D Camera (cont.)13. To manage the input c