Axis 5800 Manual do Utilizador descarregar pdf (Página 62)

Section 6 Setting Up - NetWare AXIS 5800+ Mobile User’s Manual

Setup using NDPS

The AXIS 5800+ Mobile supports Novell Distributed Print

Services (NDPS), which is Novell’s new generation architecture

for printing and printer administration. You can run NDPS over

Pure IP (TCP/IP) or IPX/SPX.

Before the AXIS 5800+ Mobile can be installed, make sure that

NDPS is installed and a Broker is loaded on your NetWare file

server.

AXIS 5800+ Mobile uses the AXIS NDPS Gateway for printing

in networks using either IP or IPX as transport protocols. The

printer gateways are included with the NDPS software (from

version 5.1 and up) and are automatically installed together with

NDPS.

Notes: • NDPS requires that you run NetWare 4.11 or higher.

• Pure IP is only supported by NetWare 5 or higher.

Installing the AXIS 5800+ Mobile in an NDPS environments

Having assigned an IP address to the AXIS 5800+ Mobile as

described in Assign an IP address to the print server, on page 23,

you are now ready to install the AXIS 5800+ Mobile for NDPS

printing. You can select to install the connected printers as

public or controlled access printers. Follow the instructions

below to install the AXIS 5800+ Mobile using NDPS:

Notes: • The HP-JETADMIN parameter of the AXIS 5800+ Mobile must be

set to YES in order for the communication between the AXIS

5800+ Mobile and the NDPS gateway to be enabled. Set this

parameter in the print server’s internal web pages: admin |

General Settings | HP JetAdmin Support (default value=NO)

• If you do not have an NDPS Manager object available, start out

with creating one in the NetWare Administrator.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 170 171

Sem comentários

Axis 5800 Manual do Utilizador Página 62