Axis AXIS USB Manual do Utilizador descarregar pdf (Página 47)

Print Server Management Methods

AXIS OfficeBasic USB & AXIS OfficeBasic Parallel User’s Manual 47

Parameter List Shows all print server parameters and their current settings.

Restart Restarts the print server.

Software Default By pressing the Software Default button in the print server’s Web

interface all print server parameters and settings will be reset to their

factory default values, except:

• Node Address (NODE_ADDR.)

• IP Address (INT_ADDR.)

• DHCP enabled (DHCP_ENB.)

Also see “The Test Button” on page 56 for instructions on performing a

Factory Default.

Firmware Upgrade Upgrades the print server’s internal software.

Using FTP for Print Server Management

Having assigned an IP address to your print server, as described earlier in

this manual, you can change its parameter settings using the File

Transport Protocol (FTP).

Ensure that FTP Enabled is set to yes. To check this parameter, browse to

the print server and select Admin

| Network Settings | Detailed View |

TCP/IP Network.

Editing the config File Follow the instructions below to edit the config file using FTP:

1. Log in to the print server by typing:

ftp <host name>

- or -

ftp <IP address>

in a Windows Command window.

2. Enter user id and password. (The default entries are

root and pass.)

3. Download the config file to your host by typing:

get config

4. Edit the file using your preferred text editor.

5. Save the config file to the print server by typing

put config CONFIG

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 70 71

Sem comentários

Axis AXIS USB Manual do Utilizador Página 47