Axis USB Wireless G Manual do Utilizador descarregar pdf (Página 27)

Print Server Management

AXIS OfficeBasic USB Wireless G 27

Maintenance

Factory Default Click Factory Default then OK to reload all default settings in the print server.

Firmware Upgrade Click Firmware Upgrade to browse to your firmware directory and reload the

print server with new firmware. (You must first download firmware from

www.axis.com/techsup/firmware, select the appropraite print server model

and click Download flash file. Save the firmware flash file locally on your

computer or in a network directory.)

Restart

Click OK to restart the print server. The print server can also be restarted by

disconnecting and the re-connecting the external power supply, or by pushing

the external Reset button once.

• Performing a Factory Default will erase all settings of the print server to

default and should be performed with caution!

• After performing a Factory Default, the default wireless settings will be:

• Infrastructure mode

• SSID = <ANY> (will connect with the Access Point that has the best

signal in your wireless network)

• Data transmit rate = Auto

• Transmit mode = Auto

• Authentication Type = Open System

•Channel = 6

•DHCP enabled

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 42 43

Sem comentários

Axis USB Wireless G Manual do Utilizador Página 27