Axis P1343 Network Camera Guia de Instalação descarregar pdf (Página 5)

AXIS P13 Series Installation Guide Page 5

ENGLISH

Install the hardware

Connect the cables

1. Optionally connect external input/output devices, e.g. alarm devices. See page 18 for informa-

tion on the terminal connector pins.

2. Optionally connect an active speaker and/or external microphone.

3. Connect the camera to the network using a shielded network cable.

4. Connect power, using one of the methods listed below:

• PoE (Power over Ethernet). If available, this is automatically detected when the network

cable is connected.

• Connect an external power adapter to the power connector block, see Unit connectors,

on page 17 for wiring information.

5. Check that the indicator LEDs indicate the correct conditions. See the table on page 19 for

further details. Note that the Status LED can be configured to be unlit during normal operation.

Dimensions

IMPORTANT! - AXIS P1311/P1343/P1344/P1346 is designed for indoor and outdoor

use. To use the camera outdoors, it must be installed in an approved outdoor housing.

Please see www.axis.com for more information on outdoor housings.

Model H x W x D Weight

AXIS P1311 46 x 78 x 176 mm

(1.8” x 3.1” x 6.9”)

584 g

(1.29 lb)

AXIS P1343 46 x 78 x 192 mm

(1.8” x 3.1” x 7.6”)

585 g

(1.29 lb)

AXIS P1344 46 x 78 x 205 mm

(1.8” x 3.1” x 8.1”)

620 g

(1.37 lb)

AXIS P1346 46 x 78 x 198 mm

(1.8” x 3.1” x 7.8”)

630 g

(1.39 lb)

1 2 3 4 5 6 7 8 9 10 ... 107 108

Sem comentários

Axis P1343 Network Camera Guia de Instalação Página 5