Axis Q1604 Guia de Instalação Página 14
- Página / 104
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Page 14 AXIS Q1602/Q1604 Network Camera Installation Guide
Focus Assistant
To focus your network camera using the Focus Assistant, follow steps 1 - 3 on page 13 before you
start with the steps below.
1. Mount or place the camera so that it cannot be moved.
2. Loosen the zoom puller by turning it counter-clockwise. Move the puller to set the zoom level.
Re-tighten the zoom puller.
3. Set the camera to its extreme distant-focus position by loosening the focus puller and turning
the lens fully clockwise.
4. Press and quickly release the Control button. When the Status LED flashes green, the Focus
Assistant is enabled.
If the Status LED flashes either red or amber before you are able to adjust the lens, skip to step
7 to exit the Focus Assistant and repeat steps 3 - 7. See the notes below.
5. Gently turn the lens counter-clockwise until it stops.
6. Finally, turn the lens slowly clockwise until the status indicator flashes green or amber (not
red).
7. To exit the Focus Assistant, press the Control button again.
Note:
The Focus Assistant is switched off automatically after 15 minutes.
8. Retighten the focus puller.
9. Open the Live View page in the web browser and check the quality of the image.
10. Continue with steps 6 - 8 on page 13.
Notes:
• The view in front of the camera should not be changed during focus adjustment (steps 5 and 6). If the
camera is moved, or if a finger or other object is placed in front of the lens, steps 3 - 7 will have to be
repeated.
• If movements in front of the camera cannot be avoided, the Focus Assistant should not be used.
• If the Control button is not released within two seconds, AXIS Dynamic DNS Service is enabled instead
of the Focus Assistant.
• If the camera is mounted so that the Control button cannot be accessed, you can still use the Focus
Assistant. Follow the instructions above but mount the camera after step 4 (pressing the Control
button) instead and skip step 7.
- INSTALLATION GUIDE 1
- AXIS Q1602 Network Camera 1
- AXIS Q1604 Network Camera 1
- Korea 2
- Safeguards 3
- Installation Guide 5
- Hardware overview 6
- Install the hardware 7
- Assign an IP address 8
- Automatic discovery 10
- Set the password 11
- Adjust zoom and focus 13
- Focus Assistant 14
- Unit connectors 17
- LED indicators 19
- Further information 20
- Mesures de sécurité 22
- AXIS Q1602/Q1604 23
- Description du matériel 24
- Installation du matériel 25
- Attribution d’une adresse IP 26
- Détection automatique 27
- Configuration du mot de passe 30
- Assistant de mise au point 33
- Remarques : 34
- Connecteurs de l’appareil 37
- Voyants lumineux 39
- Informations complémentaires 40
- Sicherheitsvorkehrungen 42
- AXIS Q1602/Q1604 43
- Netzwerk-Kamera 43
- Hardwareübersicht 44
- Installation der Hardware 45
- Zuweisen einer IP-Adresse 46
- Automatische Erkennung 47
- Festlegen des Kennworts 50
- Werkzeuge 52
- Hilfe: Zum Aufrufen der 52
- Online-Hilfe für die Kamera 52
- Fokus-Assistent 54
- Geräteanschlüsse 58
- LED-Anzeigen 60
- Weitere Informationen 61
- Precauzioni 62
- Guida all’installazione di 63
- Vista dall'alto 64
- Vista posteriore 64
- Installare l'hardware 65
- Rilevamento automatico 67
- Impostazione della password 70
- Fare clic su OK 77
- Connettori 78
- Indicatori LED 80
- Ulteriori informazioni 81
- Medidas preventivas 82
- Contenido del paquete 83
- Presentación del hardware 84
- Instalación del hardware 85
- Asigne una dirección IP 86
- Detección automática 87
- Configure la contraseña 90
- Ajuste el zoom y el enfoque 92
- Asistente de enfoque 93
- Conectores de la unidad 97
- Indicadores LED 99
- Más información 100
- Ver. 1.1 104
- Printed: April 2012 104
- Part No. 45730 104
Manuais e produtos relacionados com Câmaras de segurança Axis Q1604
Câmaras de segurança Axis M1014 Manual do Utilizador
(49 páginas)
(49 páginas)
Câmaras de segurança Axis Q1604 Manual do Utilizador
(54 páginas)
(54 páginas)
Câmaras de segurança Axis M7001 Manual do Utilizador
(46 páginas)
(46 páginas)
Câmaras de segurança Axis Q8722-E Guia de Instalação
(104 páginas)
(104 páginas)
Câmaras de segurança Axis Q1755 Manual do Utilizador
(53 páginas)
(53 páginas)
Câmaras de segurança Axis 0270-002 Ficha Técnica
(4 páginas)
(4 páginas)
Câmaras de segurança Axis P1355 Manual do Utilizador
(63 páginas)
(63 páginas)
Meade LX200 manuales
Manuales del propietario y guías del usuario para Telescopios Meade LX200.
Ofrecemos 1 manuales en pdf Meade LX200 para descargar gratis por tipos de documentos: Manual de instrucciones
Comentários a estes Manuais