Axis AXIS USB Manual do Utilizador descarregar pdf (Página 4)

1.2 Features and specifications:

• USB (V2.x) from PC/Laptop running Windows XP, Vista, Windows 7, 8 or 8.1 (32 bit or 64bit)

• motor driver connector pin-out is compatible with 10 pin open source interface (Linistepper,

PICStep)

• controller works with most step/dir stepper and servo motor drivers available on the market

• buffered IO for maximum performance

• advanced interpolation algorithms

• start, stop, pause and resume execution of program on your machine

• standard RS274/NGC G-code (EMC2 and LinuxCNC compatible)

• advanced G-codes - G40, G41, G42 (Cutter Radius Compensation) supported

• advanced G-codes - G43, G49 (Tool Length Offsets) supported

• advanced G-codes - G54, G59.3 (Coordinate System Origins) supported

• tested with SolidCAM, MasterCAM, ArtCAM, Vectric, CamBam, MeshCAM ... generated G-code

• Profili 4-axes and 3-axes G-code supported

• import toolpath from DXF files

• import toolpath from PLT/HPGL files

• import toolpath from image files

• import toolpath from NC-Drill (Excellon) files

• import toolpath from Gerber (RS-274X) files

• toolpath simulation

• automatic homing procedure

• advanced toolchange procedures

• automatic tool length measuring

• export toolpath to G-code

• export toolpath to DXF

• SDK (software developers kit) is available

• works on MacOS with virtual machine emulating Windows

Mk2/4 - 4 axes USB CNC controller

• 4 axes controller for stepper and servo motors

• USB connection

• 100 kHz maximum step frequency

• 12 us minimum pulse width, 50% duty cycle at higher frequencies

• 3 digital outputs on board

• jogging keyboard support

• 4 limit switches

• 4 inputs

• spindle index signal support for spindle synchronization

• homing procedure

• tool change procedure

• tool length sensor support

• sensor for capturing and measuring

1 2 3 4 5 6 7 8 9 ... 24 25

Sem comentários

Axis AXIS USB Manual do Utilizador Página 4