Axis M7001 Manual do Utilizador descarregar pdf (Página 3)

3 of 9

IDEO SERVER BROWSER CONFIGURATION

1. Connect the Video Server Ethernet port the network and power up the server.

2. Start a browser and bring up the video server interface by typing in the IP Address- you should

see a screen similar to the one below. The first time you log in to the Video Server, you will be

prompted to set a password for the default administrative user, “root”. Remember this password,

it will be needed in the following steps to allow the g! software to connect to the Server.

3. Click Setup at the top to bring up the setup window. Click TCP/IP to access the IP address

assignment window as shown in the window below.

4. Select the radio button for “Use the following IP Address”. Assign the Axis a static IP address on

your network. Elan reccomends using 192.168.0.80 for the first Axis server, 192.168.0.81 for the

second, and so on.

5. Click Save then Click ok to the warnings, wait 30 seconds, reboot the camera then browse to the

camera at the new IP.

1 2 3 4 5 6 7 8 9

Sem comentários

Axis M7001 Manual do Utilizador Página 3