Axis PrintPoint 1P 560/100 Manual do Utilizador descarregar pdf (Página 17)

Section 2: Basic Installation

16 AXIS 150/152 User’s Manual

Connecting Printers to the AXIS 150/152

Caution M Make sure that the external power supply is marked with the correct

mains voltage.

Connect a Printer: 1. Switch off the printer.

2. Connect the printer to either the LPT1 or LPT2 port on the

AXIS 150/152 using an appropriate printer cable.

3. Connect the external power supply to the AXIS 150/152. The

Power Indicator should now be permanently lit and the Network

Indicator will start to flash during the power up and self test

routines. The AXIS 150/152 is ready for use when the Network

Indicator stops flashing and remains off.

Test the Connection: 1. Switch on the printer.

2. Press and release the test button on the AXIS 150/152 to print a

test page.

The AXIS 150/152 will print to the first printer it finds on its ports

LPT1 and LPT2, in that order.

The test page shows the most important parameters and the firmware

version number.

However, all you need to be concerned with at this stage, is whether

the test page has been printed satisfactorily or not.

Note: o The AXIS 150/152 supports high speed Centronics

Communication. For use with older printers not supporting high

speed, this function may be disabled by changing the parameter

L1_CENTR and/or L2_CENTR, as defined in Appendix B - The

Parameter List.

Parallel

➚

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 64 65

Sem comentários

Axis PrintPoint 1P 560/100 Manual do Utilizador Página 17