Axis PrintPoint 1P 560/100 Manual do Utilizador descarregar pdf (Página 18)

Section 2: Basic Installation

AXIS 150/152 User’s Manual 17

Connecting the AXIS 150/152 to the Ethernet Network

1. Switch off the printer and disconnect the AXIS 150/152 external

power supply.

2. For future reference, make a note the AXIS 150/152 serial

number found on the underside label of the print server. You will

need to know this number to perform the network configuration.

3. AXIS 150 only: Connect your AXIS 150 to the network using a

shielded twisted pair (10baseT) cable.

4. AXIS 152 only: Connect your AXIS 152 to the network using a

shielded thin wire (10base2) cable.

5. Switch on the printer and connect the external power supply to

the AXIS 150/152.

6. Successful connection of the AXIS 150/152 to your network will

be confirmed by the intermittent flashing of the Network

Indicator.

7. You are now ready to install your server onto your network using

one of the methods detailed in the Installation Guide, on page 18.

By commencing with your preferred installation method, you can

further verify that your AXIS 150/152 is properly connected to

your network.

Note: ❏ Each AXIS 150/152 Print Server is preconfigured with a unique

Node Address that is identical to the serial number. This can be

changed using the AXIS NetPilot™, if required.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 64 65

Sem comentários

Axis PrintPoint 1P 560/100 Manual do Utilizador Página 18