Axis PrintPoint 1P 560/100 Manual do Utilizador descarregar pdf (Página 51)

Appendix A: The Test Button

50 AXIS 150/152 User’s Manual

Notes: ❏ By default the Parameter List is printed to the LPT1 port of your

AXIS 150/152. However, should you require the Parameter List

to be output to LPT2, you may do so by amending the Printer

Port parameter in the Properties page, using AXIS NetPilot™.

❏ Some of the parameters require that the AXIS 150/152 is restarted

before becoming effective.

Factory Default

Settings

Should you wish to reset the AXIS 150/152 to the factory default

settings, the best way to do this is to use the Test Button. This

procedure involves switching the AXIS 150/152 off and on.

1. Remove the power cord to switch off the AXIS 150/152.

2. Press and hold down the Test Button. Whilst continuing to press

the Test Button, simultaneously switch on the AXIS 150/152 by

replacing the power cord. Keep the Test Button pressed for at

least 20 seconds after restoring power until the Network Indicator

flashes at one second intervals.

3. Release the Test Button and wait at least five seconds (five

indicator flashes).

4. Press and hold the Test Button again for at least five seconds until

the Network Indicator remains constantly lit.

The AXIS 150/152 is now reset to factory default settings. Restart the

AXIS 150/152 by switching it off and on.

Note: ❏ The NODE_ADDR parameter remains unchanged, although it

can be changed via the General Property page, using AXIS

NetPilot™.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 64 65

Sem comentários

Axis PrintPoint 1P 560/100 Manual do Utilizador Página 51