Axis AXIS USB Manual de Instruções descarregar pdf (Página 5)

Introduction

HyCNC-4P is a 4-axis machine tool motion control USB interface,

replacing traditional PC parallel port. Its operation features are as the

follows:

 Connect to PC via USB port, suitable for any netbook, notebook,

desktop and tablet PC with USB ports.

 USB kernel mode driver compatible with 32/64 bit Microsoft Windows

XP/Vista/7 OS.

 Compatible with Mach3 PC based CNC software, including version

3.043.066.

 Simultaneous connection for control axis expansion using API (127

USB device with 508 axis in theory), or control of multiple machines

with single PC running Virtual PC or VMWARE.

 4 axis linkage operation with 250KHz(-250) / 125KHz(-125) /

60KHz(-60) / 30KHz(-30) maximum stepping pulse frequency for each

axis. The polarity of the direction signals can be defined according to

requirements.

 A-axis cab be used as a slave axis.

 2-stage fast homing on all axis and automatic alignment between the

master and slave axis during homing stage.

 Support professional and low-cost automatic tool setters.

 Emergency stop (can optionally stop PWM1/PWM2).

 2 PWM outputs – PWM1 for spindle speed control and PWM2’s duty

cycle can be adjusted by a M code.

 2 relay control outputs.

 Small size and easy to use, similar to an usb-parallel port adapter.

 Online firmware updating.

 Firmware recovery mode to eliminate the danger of firmware updating.

 Control signals on DB25 connector are defined as a PC parallel port

1 2 3 4 5 6 7 8 9 10 ... 67 68

Sem comentários

Axis AXIS USB Manual de Instruções Página 5