Axis AXIS USB Manual de Instruções descarregar pdf (Página 51)

Wend

AutoToolSetting(GetOEMDRO(824))

While IsMoving()

Sleep(100)

Wend

code("G43 ")

DoSpinCW();

Call M900 in GCode execute following operations: “G53 G0 Z200” moves the

current to a safe height suitable for manual tool change. Then spindle is stopped.

Then move to tool change located at machine coordinate (500, 500) by “G53 G0

X500 Y500”. The a window with confirm button pops up on the screen, waiting

manual tool change to be carried out. After tool changing, click on the

confirmation button to continue the program. The machine moves to the tool

setter center to start tool setting process. After the setting is finished, the new

tool length offset is used and spindle rotates again.

Attention: the safety of the manual tool changing operator is depend on the

proper running of the above script by the PC control system. If a safer condition is

required (even the malfunction of the PC control system doesn’t start spindle to

hurt the operator), install safety switches or consult experts or HyTechWorks for a

proper solution.

EStop Configuration

Attention: it is suggested to use the EStop provided by the PC control system as

the secondary or backup solution and use direct hardware solution as the

primary solution to guarantee stopping of the machine under critical conditions.

The following configuration of the EStop is all based on using PC and HyCNC-4P

interface. It is provided as it is for a reference only.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 67 68

Sem comentários

Axis AXIS USB Manual de Instruções Página 51