Axis AXIS 5900 Manual do Utilizador descarregar pdf (Página 18)

Section 4 Basic Installation (Wired & Wireless) AXIS 5900 User’s Manual

Section 4 Basic Installation (Wired & Wireless)

Connecting the Hardware

1. Make sure that your printer is switched off and that the AXIS

5900 external power supply is disconnected.

2. Locate the serial number, found on the underside label of the

AXIS 5900, and write it down. You will need this number to set

the IP address of the print server.

3. Connect the printer to the LPT1 or the LPT2 port on the AXIS

5900 using an appropriate printer cable.

4. Connect the AXIS 5900 to the wired network using a twisted pair

category 5 cable, 10baseT and 100baseTX.

Note:

5. Switch on the printer and connect the external power supply to

the AXIS 5900. The power indicator will light up. When the

network indicator starts to flash, the AXIS 5900 is successfully

connected to the network.

6. Wait 1 minute. Press the test button on the AXIS 5900 to print a

test page. The test page includes a list of the most important

parameters, including the network speed, firmware version

number and IP address of the print server.

Notes:

You can install the AXIS 5900 without using a network cable, simply skip step 4 in

these instructions.

The AXIS 5900 uses high-speed Centronics Communication. For use with older

printers not supporting high speed, this function can be disabled by using a

standard web browser. Please refer to Management and Configuration, on page

92, for more information.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 153 154

Sem comentários

Axis AXIS 5900 Manual do Utilizador Página 18