Axis AXIS 5900 Manual do Utilizador descarregar pdf (Página 68)

Section 7 Setting Up - Macintosh AXIS 5900 User’s Manual

Autodetect Printer

Type

The print server can automatically detect the type of printer you

are using if you enable the ’Autodetect Printer Type’-function.

The print server can then recognize Epson and Hewlett Packard

InkJet printers. Most Epson and Hewlett Packard InkJet printers

that have MacOS printer drivers for network printing are

supported. Without the Autodetect Printer Type function, the

AppleTalk printer type has to be specified manually in the print

server. For Epson InkJets it would be "EPSONLQ2" and for HP

InkJets it would be "DeskWriter". If the print server doesn't

recognize the connected printer the default setting "LaserWriter"

will be used as printer type. "LaserWriter" is the recommended

setting to be used with all PostScript printers.

To enable the ’Autodetect Printer Type’-function:

1. Log in to your print server’s web interface and choose: Admin |

Network Settings | Detailed View | Macintosh |

AutoDetectPrinterType | YES.

See the print server’s web interface Help pages for details.

LaserWriter 7.0 Printer

Driver

Follow the instructions below to choose a printer:

1. Select Chooser from the Apple menu.

2. Click the LaserWriter icon.

3. If your network has more than one zone, click on the zone you

want. If your network has no zones, this box does not appear.

4. Click the name of the printer you want. The default AXIS 5900

printer names are shown as: AXIS<nnnnnn>_<port>, where

<nnnnnn> is the last six digits of the AXIS 5900 serial number,

and <port> is LPT1 and LPT2. For example: AXIS100086_LPT1.

5. Click the Close box. This completes the configuration and closes

the Chooser.

Repeat this procedure for each Macintosh computer on the

network using the AXIS 5900.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 153 154

Sem comentários

Axis AXIS 5900 Manual do Utilizador Página 68