Axis AXIS 5900 Manual do Utilizador descarregar pdf (Página 56)

Section 5 Setting Up - Windows AXIS 5900 User’s Manual

Using the Microsoft

LPD monitor with

Window NT 3.5x

This section describes how to set up a Windows NT Server

v3.5 and v3.51 for LPD printing over the TCP/IP protocol, using

the built-in Microsoft LPD monitor.

Basic Setup If you have not already done so, you should perform the TCP/IP

basic setup procedures prior to installing a printer for LPD

printing. These procedures are defined in Assigning an IP

address to the print server, on page 21 and onwards.

Install the TCP/IP

Protocol Stack

In the Control Panel, click the Network icon. If the TCP/IP

Printing entry appears, then TCP/IP is already installed. Close

the Network folder and continue with Installing a printer on the

next page.

Follow these steps to install the TCP/IP protocol stack:

1. In the Control Panel, select Network.

2. Click Add Software...

3. Select “TCP/IP Protocol and related components” and then click

Continue.

4. Check “TCP/IP Network Printing Support” and then click

Continue.

5. Select path and then click Continue.

6. Click OK in the Network Settings dialog box.

Installing a Printer Follow the following step-by-step instructions to install a

printer for LPD printing.

1. In the Control Panel, click the Print Manager.

2. In the Printer menu, select Create Printer.

3. In the Printer Name field, type a name for your printer.

4. Choose a suitable printer driver for your printer.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 153 154

Sem comentários

Axis AXIS 5900 Manual do Utilizador Página 56