Axis AXIS 5900 Manual do Utilizador descarregar pdf (Página 98)

Section 10 Management and Configuration AXIS 5900 User’s Manual

Parameter List Button Shows all the current parameter settings of the print server.

Restart Button Restarts the print server.

Factory Default Button A Factory Default is done to reset the internal settings of the

print server to default. All parameters except Node Address

(NODE_ADDR), Internet Address (IP_ADDR) and DHCP enabled

or disabled (DHCP_ENABLE.) are reset.

Firmware Upgrade

Button

Upgrades the print server’s internal software.

Print Server Settings

Some useful settings that can be changed in the print server are

described here. See the print server’s Help pages for detailed

information on all print server settings. For

Changing the

Network Printer’s

’Name’

From the print server’s web interface you can assign a user-

friendly name to a network printer. This name will then show up

under the ’Name’ column in AXIS Print System and AXIS

Wireless Printing Utility.

1. Log into the AXIS 5900 internal web pages and choose |admin |

This Print Server | General | Print Server Name.

2. Enter the new name of the print server and click OK.

Changing the

Network Printer’s

’Location’

If you want to inform users about the physical location of a

network printer, you can assign a descriptive location name to

it. This name will then show up under the ’Location’ column in

AXIS Print System and AXIS Wireless Printing Utility.

1. Log into the AXIS 5900 internal web pages and select admin |

This Print Server | General | System Location.

2. Enter the location of the print server and click OK.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 153 154

Sem comentários

Axis AXIS 5900 Manual do Utilizador Página 98