Axis AXIS 5900 Manual do Utilizador descarregar pdf (Página 27)

AXIS 5900 User’s Manual Section 4 Basic Installation (Wired & Wireless)

2. From the AXIS Print System Available Printers/Print

Servers view, select the unconfigured Axis print

server icon.

3. Double-click the print server icon. The AXIS Print System Add

Printer Wizard will appear. Follow the instructions below to set a

permanent IP address.

4. In the IP Address field, enter the new IP address of the print

server.

5. Set the Subnet Mask and Default Gateway according to your

network configuration. Click Next> to continue.

6. Next, you will be prompted to enter an Administrator password,

the default password is pass. Click OK.

7. Next, AXIS Print System will start looking for printers attached to

the print server. Click the radio-button next to the printer you

want to add to My Printers and click Next>. Continue to

Configuring a network printer in AXIS Print System for Windows,

on page 38 to install an appropriate printer driver.

The print server will have a temporary IP address, which was assigned to it

through Auto-IP*. The default Auto-IP address structure is: 169.254.xxx.xxx. This

temporary IP address must be changed to a new and unused one

* Auto-IP will only work if there is no DHCP server on the network and the DHCP

and Auto-IP parameters are enabled in the AXIS 5900 (DHCP and Auto-IP are

enabled by default).

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 153 154

Sem comentários

Axis AXIS 5900 Manual do Utilizador Página 27