Axis 7100 Guia de Instalação descarregar pdf (Página 393)

100

101

ADT Model 7100 Semi-Automatic Dicing System Operations Manual

Cut Parameters

P/N 97100-9002-000-14 Ver 06/05

A-27

Cut Overtravel

The distance along the X-Axis that is added to the cut

to ensure that all cuts begin from beyond the edge of

the Workpiece.

For APC, this distance is added only to the start cut.

The cut length should compensate for this addition.

For GPC, this distance is added to both X and Y. (See

Overtravel - Y-Axis.)

This value compensates for any inaccuracies in

placement of the Workpiece on the Cutting Chuck.

Possible Values:

min = 0, max = 100, Default = 10

Cut

Overtravel - Y-

Axis

The distance along the Y-Axis that is added to the

cuts to ensure that all cuts begin from beyond the

edge of the Workpiece.

This value compensates for any inaccuracies in

placement of the Workpiece on the Cutting Chuck.

Possible Values:

min = -100, max = 100, Default = 10

Cut

Spindle Speed

(KRPM)

The rotational speed of the Spindle (in KPRM).

Possible Values:

min = 1, max = 30, Default = 4

Cut To Index

The number of the Index in the Cut Map at which to

stop cutting.

Possible Values:

min = 1, max = 999, Default = 999

Table A-9: Cut Parameters

Category Parameter Description

1 2 ... 388 389 390 391 392 393 394 395 396 397 398 ... 423 424

Comentários a estes Manuais

Sem comentários

Axis 7100 Guia de Instalação Página 393

Comentários a estes Manuais

Manuais e produtos relacionados com Servidores Axis 7100