Axis CAMERA RECORDER 1.1 Manual do Utilizador descarregar pdf (Página 21)

AXIS Camera Station Administration

AXIS Camera Station User’s Manual 21

6. Enter the camera/video IP address in the Camera IP address (LAN) field. If

you are working in a WAN (e.g. over the Internet), enter the Camera IP

address (WAN) too.

7. If the camera is password protected, enter the User ID and Password.

8. Click Link to Camera to verify that you can access the camera.

9. Click OK to save and exit.

Click this button to open the Camera Selection view; a non-editable table

containing summarized information on all configured Axis cameras and

network video servers.

Select Camera Switch between available cameras. You will only be able to set up the number

of cameras defined by your license.

Camera Explorer

button

AXIS Camera Station can automatically detect cameras and video servers in

your network. To detect and add (or remove) new cameras, click this button to

open the Camera Explorer, a tool that scans a user-defined range of IP

addresses and displays any Axis camera or video server found there.

Detect, add or remove cameras in the Camera Explorer

•The WAN IP address is where AXIS Camera Station should fetch live images.

This might be the same as your LAN IP address, but depends on your

network/Firewall/NAT. The WAN must be specified if a client or web

interface client is run from another network than AXIS Camera Station. If

no WAN address is available, enter the LAN address.

•Host names or IP addresses can be entered in the LAN/WAN fields.

Axis camera and video servers have a default User ID = root and Password =

pass. The password may be changed in the camera.

1. Enter IP range you wish to scan, e.g.

2. Click

Scan

171.15.115.2 - 171.15.115.254

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 72 73

Sem comentários

Axis CAMERA RECORDER 1.1 Manual do Utilizador Página 21