Axis CAMERA RECORDER 1.1 Manual do Utilizador descarregar pdf (Página 60)

AXIS Camera Station Web

60 AXIS Camera Station User’s Manual

AXIS Camera Station Web

A normal web browser can be used on client workstations to view cameras and

perform simple operations.

To enable live view, a set of IP addresses and port numbers must be opened in

your firewall; there must be an open port for each camera and one port for

AXIS Camera Station.

Simply viewing recorded events/images does not require the above firewall

configurations.

You will find the WAN IP address of AXIS Camera Station under General |

Server IP address.

Warning!

Enable Client Web Access

If you want to allow clients to access the AXIS Camera Station Web, proceed

with these steps:

1. From the Administration pages, select the General tab.

2. In the Server IP address field, make sure the correct IP address that clients

will use to connect to the server is entered. Make a note of the IP address.

• In Windows XP Professional, a maximum of five users can access to the

web interface simultaneously. This limitation is not present in other

operating systems.

• Both AXIS Camera Station and AXIS ThinWizard software use port 80 as

default. You must change the port on either one of these programs if you

intend to use them on the same network segment.

When the web interface is installed on the server, web sharing is enabled. This

will allow users on your network to upload scripts or programs onto the server

and execute them.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 72 73

Sem comentários

Axis CAMERA RECORDER 1.1 Manual do Utilizador Página 60