Axis CAMERA RECORDER 1.1 Manual do Utilizador descarregar pdf (Página 39)

AXIS Camera Station Administration

AXIS Camera Station User’s Manual 39

Close Text The text that appears on the push button that closes the I/O.

Text for Alarm ON The text that appears in the alarm list when port is not in its the normal state,

i.e. when activated.

Text for Alarm OFF The text that appears in the alarm list when the port is in its normal state.

On Alarm configuration in the Administration pages and the subsequent layout in AXIS Camera

Station - I/O Status

I/O Rules

I/O only valid if I/O... The activation of one I/O can be set as being dependent on another I/O. Check

to enable and specify the other I/O and the state it should be in to activate the

first I/O.

Select camera (button) Opens the dialog for selecting the cameras that will start recording on the

incoming alarm. Note that it is possible to record on any camera in the system

and not just on the camera with the I/O that triggers the alarm.

Add Alarm (button) Click to add a new alarm. Provide the new alarm with a name and click OK. The

new alarm is now available in the drop-down list in I/O definition (see I/O

Definition, on page 37) and can be configured.

Delete Alarm (button) Click to delete the alarm currently being displayed. Note that this will delete

the alarm immediately - no confirmation will be requested.

On or Off shown

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 72 73

Sem comentários

Axis CAMERA RECORDER 1.1 Manual do Utilizador Página 39