Axis CAMERA RECORDER 1.1 Manual do Utilizador descarregar pdf (Página 22)

AXIS Camera Station Administration

22 AXIS Camera Station User’s Manual

Enable camera Check to enable image capture from the camera. If this checkbox is not

checked when registering a camera, recordings and live-view will not be

possible!

Camera Name The camera’s name as it will appear in the Main window, alarm log and web

page.

Camera Type Specify the camera model in the Camera Type field. It is very important that

you specify the correct Axis camera model! Make sure you are using the latest

firmware on the camera to get the best performance and features. If using an

analog CCTV camera, specify the Axis Video Server it is connected to.

Camera Port Number For a camera connected to a Video Server, specify the video port number.

File extension Specify the file format to save images in. Currently only jpg is available.

Camera IP Address

(LAN)

For a network camera, enter the LAN IP address or host name.

If you have changed the default port settings in the camera, it must be changed

here accordingly. You can e.g. specify a port number other than the default port

by adding :port after the IP address. Example: 10.13.6.128:8080

Camera IP Address

(WAN)

Specify the WAN IP address or host name from where AXIS Camera Station

should fetch live images. This might be the same as your LAN IP address, but

depends on your network/Firewall/NAT.

The WAN must be specified if a client or web interface client is run from

another network than AXIS Camera Station. If no WAN address is available,

enter the LAN address.

If you have changed the default port settings in the camera, it must be changed

here accordingly. You can e.g. specify a port number other than the default port

by adding :port after the IP address. Example: 10.13.6.128:8080

Camera User/Password If the camera is protected by a user ID and password, specify these here.

Axis cameras and video servers have a default User ID = root and Password =

pass. The password may have been changed.

Show Pop-up on

motion/alarm

If checked, the window with this camera's image will pop-up on the screen

whenever an alarm or motion occurs. Typically used in connection with audio

communication initiated by an external alarm.

Pan-Tilt-Zoom Camera Check this for a Pan-Tilt-Zoom Camera with accessible controls. The controls

available with the PTZ device will be displayed when viewing the camera's

image in its own window, i.e. when the camera is selected from the drop-down

list in the main window.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 72 73

Sem comentários

Axis CAMERA RECORDER 1.1 Manual do Utilizador Página 22