Axis BTA 2100D Manual do Operador descarregar pdf (Página 293)

100

101

291

TSD Detector

If you indicate that a TSD Detector is installed, an Oven Power switch, an

Electronics switch, a Temperature setting, a Bead Current setting and a Time

Constant setting will appear.

If you indicate that an TSD Detector is to be turned on and heated, select the

desired Temperature and Bead Current setting.

Indicate whether or not you will use the installed TSD Detector by clicking on the

“On” or “Off” radio buttons.

You can time-program the detector range, autozero, and bead power in the

spreadsheet.

Select the desired TSD Time Constant by clicking on the “Slow” or “Fast” radio

buttons.

Select the desired gas flow rates for the detector EFC.

The first row of the spreadsheet contains the Initial Range, Autozero, and Bead

Power settings for the TSD Detector. The TSD will switch to this setting when the

method is activated, and will be restored to this setting when each

chromatographic run is completed.

Rows after the first row of the spreadsheet contain the time-programmed settings

for the Range, Autozero, and Bead Power. They will be switched to the value in

each row at the indicated time.

1 2 ... 288 289 290 291 292 293 294 295 296 297 298 ... 596 597

Comentários a estes Manuais

Sem comentários

Axis BTA 2100D Manual do Operador Página 293

Comentários a estes Manuais

Manuais e produtos relacionados com Software Axis BTA 2100D