Axis BTA 2100D Manual do Operador descarregar pdf (Página 381)

100

101

379

Item Description

Manage IP addresses

from this Workstation

Checked or not checked

When IP addresses are managed from a central

location by a Network Administrator, the BOOTP Server

on your Workstation must be disabled (not checked).

Require password entry

for this dialog box

Checked or not checked

Check this box to restrict access to the BOOTP Server

dialog box to avoid inadvertent or unauthorized changes

to IP address assignments. If this item is checked, the

next time you enter the BOOTP Server dialog box, you

will be prompted for a password. The initial password is

blank (no password). To set your password initially,

enter the desired password in the Enter new password

and Re-enter new password fields. Subsequent entry

into the BOOTP Server will require this password.

Ethernet Address Displays the Ethernet address of any 3900 GCs already

connected to the network and powered on. You may

also manually enter an Ethernet address for a 3900 GC

(available from the 3900 GC front panel display).

IP Address Displays the IP address of any 3900 GCs already

connected to the network and powered on. You may

also manually enter an IP address for a 3900 GC. Use

the manual entry of IP addresses and Host Names

when individual IP addresses have been reserved for

use by each 3900 GC but IP Address and Host Name

management is not performed by a Network

Administrator.

Host Name You must enter a name for each 3900 GC. The IP

address will not be assigned to the GC until a name is

entered.

Assign IP addresses

manually

Selected or not selected

Select this entry if you manually enter IP addresses and

Host Name entries in the table.

Assign IP addresses

starting from

Selected or not selected

Select this entry to consecutively assign IP addresses

beginning from a particular address. Enter the number

of IP addresses to assign automatically and the starting

IP address. As 3900 GCs are powered on, IP addresses

are automatically assigned from the specified address.

Subnet Mask Displays the subnet mask assigned to the Workstation.

This parameter is assigned in the TCP/IP network setup

in the Control Panel application.

Gateway Displays the Gateway assigned to the Workstation. This

parameter is assigned in the TCP/IP network setup in

the Control Panel application.

Domain Displays the Domain name assigned to the Workstation.

This parameter is assigned in the TCP/IP network setup

in the Control Panel application.

1 2 ... 376 377 378 379 380 381 382 383 384 385 386 ... 596 597

Comentários a estes Manuais

Sem comentários

Axis BTA 2100D Manual do Operador Página 381

Comentários a estes Manuais

Manuais e produtos relacionados com Software Axis BTA 2100D