Axis BTA 2100D Manual do Operador descarregar pdf (Página 92)

100

101

The Monitor and Event Message window will detail results of the basic system.

If a fault had occurred, the message would indicate what test failed and the

source of the problem.

A more detailed test of the heater zones can be done by clicking in the box of the

zone to be tested under Heater Test. To complete these tests can take up to

13.5 hours for the trap, 2 hours for the manifold, and three hours for the transfer

line. The manifold and transfer line tests can be run simultaneously.

At the far right of the window is a dialog box of Monitor States, which allows you

to monitor the multiplier, rf, Filament, and Ion Gauge if present. Click the check

box to activate the selection. Some elements of the diagnostic display are active

if some trap components are not on.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 596 597

Comentários a estes Manuais

Sem comentários

Axis BTA 2100D Manual do Operador Página 92

Comentários a estes Manuais

Manuais e produtos relacionados com Software Axis BTA 2100D