Axis BTA 2100D Manual do Operador descarregar pdf (Página 405)

100

101

403

Item Description

AutoLink... Two AutoLink commands when Sample Type is Baseline,

Analysis, Calibration, or Verification.

One AutoLink command when Sample Type is AutoLink.

One Activate Method Command when Sample Type is

Activate Method.

Opens the AutoLink Parameters dialog box to set the options

for linking to a remote application during automation through

System Control.

Opens the Activate Method Dialog Box to set the path name

for activating a new method during automation of a

RecalcList through System Control.

Unid Peak Factor 0 to 1,000,000.0

Sets a calibration factor for unidentified peaks. Not used by

calibration samples.

Multiplier 0.000001 to 1,000,000.0

Sets a value for the multiplier. Results for the sample are

multiplied by this value. Not used by calibration samples.

Divisor 0.000001 to 1,000,000.0

Sets a value for the divisor. Results for the sample are

divided by this value. Not used by calibration samples.

Amount Standard 0.000001 to 1,000,000.0

GC Files: Sets the amount of the first internal standard.

Used to calibrate results for Internal Standard and

Normalized Percent calculations. Not used by calibration

samples.

MS files: Sets an ISFactor which is used by Analysis and

Verification samples. It will be multiplied by the appropriate

Compound Calibration Level Amount that is in the DH

Method being used. Note that internal standards in Analysis

and Verification samples always use the amount that is

specified in Calibration Level 1.

MultiChannel

MultiStandard

none, multiple, specific channel

GC files: Opens the Data Handling Channels dialog box to

specify the calibration parameters for up to five different

Detector Channels.

MS files: Not used by MS data handling. These are GC

detector channels which are different from the scan function

channels that may be specified in the MS method.

Add Adds a line to the end of the RecalcList.

Insert Adds a new line before the highlighted line.

Delete Deletes the highlighted line in the RecalcList.

Fill Down Causes the contents of the top cell in a series of highlighted

cells to be copied to the cells below it. Used to edit all the

cells in a column quickly.

Browse... Opens the Open Data File dialog box to select a Data File to

add to the RecalcList.

Report... Shows the results report for the selected Data File.

1 2 ... 400 401 402 403 404 405 406 407 408 409 410 ... 596 597

Comentários a estes Manuais

Sem comentários

Axis BTA 2100D Manual do Operador Página 405

Comentários a estes Manuais

Manuais e produtos relacionados com Software Axis BTA 2100D