Axis BTA 2100D Manual do Operador descarregar pdf (Página 321)

100

101

319

Type 11 Detector EFC Status:

Item Description

Type 11

Displays the Detector EFC type. Detector EFC Type 11

has 3 channels and is used for FID detector gas control.

Ready Yes or No.

The Detector EFC is Ready (Yes) if the setpoints have

been achieved and stabilized. The Detector EFC is Not

Ready (No) if readiness to start a run has not been

achieved or if, during a run, the Detector EFC becomes not

ready or goes “out of tolerance”. Some reasons the GC

may go Not Ready during a run are: the temperature

program is too aggressive, the oven door is opened, the

coolant runs out, the power line voltage drops, etc.

Fault Yes or No.

Displays if a fault in the Detector EFC component has

occurred

Ch 1 (Make up) Set,

Actual

Displays, in ml/min, the programmed and actual channel 1

flow rate.

Ch 2 (H2) Set, Actual Displays, in ml/min, the programmed and actual channel 2

flow rate.

Ch 3 (Air) Set, Actual Displays, in ml/min, the programmed and actual channel 3

flow rate.

Type 12 Detector EFC Status:

Item Description

Type 12

Displays the Detector EFC type. Detector EFC Type 12

has 3 channels and is used for TSD detector gas control.

Ready Yes or No.

Fault Yes or No.

Ch 1 (Makeup) Set,

Actual

Displays, in ml/min, the programmed and actual channel 1

flow rate.

Ch 2 (H2) Set, Actual Displays, in ml/min, the programmed and actual channel 2

flow rate.

Ch 2 (Air) Set, Actual Displays, in ml/min, the programmed and actual channel 3

flow rate.

1 2 ... 316 317 318 319 320 321 322 323 324 325 326 ... 596 597

Comentários a estes Manuais

Sem comentários

Axis BTA 2100D Manual do Operador Página 321

Comentários a estes Manuais

Manuais e produtos relacionados com Software Axis BTA 2100D