Axis BTA 2100D Manual do Operador descarregar pdf (Página 32)

100

101

Ensure that no entries have been made in your Gateway, and that Domain Name

Server (DNS) and WINS Configuration have been disabled. These entries are not

used in an isolated network and may cause problems if they are present. Delete

any settings that may have been entered from a previous configuration.

2. Click OK. Reboot Windows for the changes to take affect.

NOTE: Refer to Communication Problems in the Diagnostic and

Troubleshooting section for information about diagnostic tools to verify that your

network installation is correct.

Configuring TCP/IP Parameters for a Company

Network

The following three steps assume you have completed steps 1 through 5 from

the previous table.

3. Select TCP/IP from the network components list and click Properties. The

TCP/IP properties dialog box is displayed.

Enter the IP address to be used by this Workstation. Contact your Network

Administrator (or whoever assigns IP addresses in your network) to get the

appropriate address. Note that each Workstation PC must have a unique IP

address. Enter the appropriate Subnet Mask to be used with this IP address.

4. Your Network Administrator may instruct you to obtain an IP address

automatically by selecting the appropriate radio button.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 596 597

Comentários a estes Manuais

Sem comentários

Axis BTA 2100D Manual do Operador Página 32

Comentários a estes Manuais

Manuais e produtos relacionados com Software Axis BTA 2100D