Axis BTA 2100D Manual do Operador descarregar pdf (Página 311)

100

101

309

1177 Injector Status:

Item Description

Ready Yes or No.

The 1177 injector oven is Ready (Yes) if the setpoints have

been achieved and stabilized. The 1177 injector oven is Not

Ready (No) if readiness to start a run has not been achieved or

if, during a run, the oven becomes not ready or goes “out of

tolerance”.

Fault Yes or No.

Displays if a fault in the 1177 injector component has occurred.

1177 Oven On or Off.

Displays if the 1177 injector oven component is turned off or on

at the 3800 GC. The 1177 injector is an isothermal injector.

Setpoint 50 to 450 °C

Displays the 1177 injector oven programmed temperature

setting in the active method.

Actual 50 to 450 °C

Displays the actual temperature of the 1177 injector oven at

the 3800 GC.

Split State On or Off.

Displays the current split state of the 1177 injector method.

1079 Injector Status:

Item Description

Ready Yes or No.

The 1079 injector oven is Ready (Yes) if the setpoints have

been achieved and stabilized. The 1079 injector oven is Not

Ready (No) if readiness to start a run has not been achieved

or if, during a run, the oven becomes not ready or goes “out

of tolerance”. Some reasons the GC may go Not Ready

during a run are: the temperature program is too aggressive,

the oven door is opened, the coolant runs out, the power line

voltage drops, etc.

Fault Yes or No.

Displays if a fault in the 1079 injector component has

occurred.

1079 Oven On or Off.

Displays if the 1079 injector oven component is turned off or

on at the 3800 GC.

Coolant On or Off.

Displays if the 1079 injector oven coolant is enabled in the

active method.

Setpoint -99 to 450 °C

Displays the 1079 injector oven programmed temperature

setting in the active method.

Actual -99 to 450 °C

1 2 ... 306 307 308 309 310 311 312 313 314 315 316 ... 596 597

Comentários a estes Manuais

Sem comentários

Axis BTA 2100D Manual do Operador Página 311

Comentários a estes Manuais

Manuais e produtos relacionados com Software Axis BTA 2100D