Axis BTA 2100D Manual do Operador descarregar pdf (Página 296)

100

101

294

Output Window

The Output window contains up to three Output Port Programs (Port A, Port B,

Port C). Use the Output Port Programs to time program the detector signal

source and attenuation at each port.

Use the tabs to select which Output Port Program you wish to edit.

Indicate whether or not the Port at each position is installed by clicking on the

“Yes” or “No” radio buttons.

Time-program detector signal source and attenuation in the spreadsheet.

The first row of the spreadsheet contains the Initial Signal Source and

Attenuation for the Port. The Port will switch to this setting when the method is

activated, and will be restored to this setting when each chromatographic run is

completed.

Rows after the first row of the spreadsheet contain the time-programmed settings

for the Signal Source and Attenuation. They will be switched to the value in each

row at the indicated time.

1 2 ... 291 292 293 294 295 296 297 298 299 300 301 ... 596 597

Comentários a estes Manuais

Sem comentários

Axis BTA 2100D Manual do Operador Página 296

Comentários a estes Manuais

Manuais e produtos relacionados com Software Axis BTA 2100D