Axis BTA 2100D Manual do Operador descarregar pdf (Página 308)

100

101

306

Column Oven Status:

Item Description

Ready Yes or No.

The column oven is Ready (Yes) if the setpoints have been

achieved and stabilized. The column oven is Not Ready (No) if

readiness to start a run has not been achieved or if, during a

run, the oven becomes not ready or goes “out of tolerance”.

Some reasons the GC may go Not Ready during a run are: the

temperature program is too aggressive, the oven door is

opened, the coolant runs out, the power line voltage drops, etc.

Fault Yes or No.

Displays if a fault in the column oven component has occurred.

Oven Power On or Off.

Displays if the column oven component is turned off or on at

the 3800 GC.

Coolant On or Off.

Displays if the column oven coolant is enabled in the active

method.

Setpoint -99 to 450 °C

Displays the column oven programmed temperature setting in

the active method.

Actual -99 to 450 °C

Displays the actual temperature of the column oven at the 3800

GC.

Stabilization

Time

0.00 to 10.00 min

Shows the 3800 GC column oven stabilization time in minutes.

The stabilization time counts down from the programmed

method value and then displays 0.00 minutes when the

stabilization period is over.

Enable Column

Oven Coolant at

30 °C to 450 °C

Displays the programmed column oven temperature at which

the column oven coolant is enabled.

Timeout 0.01 min to 999.99 min

Displays the programmed coolant time-out value in the active

method for the column oven.

Timed Out Yes or No.

Displays Yes if the coolant time-out period has elapsed for the

column oven.

1 2 ... 303 304 305 306 307 308 309 310 311 312 313 ... 596 597

Comentários a estes Manuais

Sem comentários

Axis BTA 2100D Manual do Operador Página 308

Comentários a estes Manuais

Manuais e produtos relacionados com Software Axis BTA 2100D