Axis BTA 2100D Manual do Operador descarregar pdf (Página 43)

100

101

Adding a GC and Varian MS to the Instrument in System

Control

Once you have configured your Workstation computer and 3800 or 3900 GC for

network communication, you may select one GC to be controlled from each

Varian MS Workstation.

If it is not already running, start System Control. The Star Assistant

Communication Configuration Wizard will be displayed if you have not yet

configured your GC Ethernet connections. Click Next.

Click Address to attach to a 3800 GC on the Ethernet network.

When the Address button is selected, the Module Selection dialog box is

displayed.

Select the GC that you wish to connect to the address (44). Click OK.

NOTE: If you are running on a company network, only GCs on the same local

subnet appear in the Select Available Modules dialog box. To connect to a GC in

a different subnet, type its IP Address directly into the IP address field in the

Setup Ethernet Ports dialog box. Consult your Network Administrator about

subnets on your network.

After you have completed your selection, the Setup Ethernet Ports Dialog Box

shows the 3800 GC connected to your Workstation.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 596 597

Comentários a estes Manuais

Sem comentários

Axis BTA 2100D Manual do Operador Página 43

Comentários a estes Manuais

Manuais e produtos relacionados com Software Axis BTA 2100D