Axis BTA 2100D Manual do Operador descarregar pdf (Página 406)

100

101

404

Item Description

Defaults… Displays the Set Defaults dialog box, allowing you to specify

default values for each applicable field in the RecalcList.

Begin Opens the Begin RecalcList Dialog Box to specify a method

to be used while recalculating or printing all RUN files in this

RecalcList, and to then begin recalculating or printing the

files.

Suspend Suspends execution of this RecalcList after the current file

has been completed.

Resume Resumes execution of this RecalcList after it has been

suspended.

Data Handling Channels Dialog Box

NOTE: This dialog box is only used to specify standard GC data handling. MS

data handling uses only one detector channel.

You can specify the Multiplier, Divisor, and Unidentified Peak Factor on a

channel-by-channel basis for up to five different detector channels. And you can

specify up to eight internal standards for each of the five channels, for a total of

forty internal standards. If you only want to specify a single Multiplier,

Divisor, Unidentified Peak Factor, and Amount Standard to be used for all

channels of all detectors, you may do so directly in the SampleList,

RecalcList or Inject Single Sample dialog box and do not need to use this

dialog box.

If you plan to specify parameters on a channel-by-channel basis, before opening

this dialog box make sure that the active method contains the data handling

sections for each channel, and that their peak tables contain the standard peaks

(if any) properly named and checked. The dialog box uses information from the

active method to help you make the proper specifications for the type of

calibration method that you will be using. If you later change the standard

peak names in the peak table, you will need to revisit this dialog for each

sample to update the names and amounts.

1 2 ... 401 402 403 404 405 406 407 408 409 410 411 ... 596 597

Comentários a estes Manuais

Sem comentários

Axis BTA 2100D Manual do Operador Página 406

Comentários a estes Manuais

Manuais e produtos relacionados com Software Axis BTA 2100D