Axis BTA 2100D Manual do Operador descarregar pdf (Página 358)

100

101

356

Specify the desired Stabilization Time.

Use the spreadsheet to build a temperature ramp program to heat and/or cool the

Column Oven.

The first row of the spreadsheet contains the Initial temperature and hold time for

the Column Oven. The Column Oven will equilibrate to this setting, and stabilize

for the specified Stabilization Time, when the method is activated, and will be

restored to this setting when each chromatographic run is completed.

Rows after the first row of the spreadsheet contain the programmed settings for

each of the ramp segments. Each segment will ramp to the specified

temperature at the specified rate (assuming the rate is achievable), and then

hold the temperature for the specified time. (Note that the Rate in the first row is

always blank and cannot be edited. Also note that the entire Total column cannot

be edited.)

Autosampler Window

The Autosampler window contains sampling parameters for the 8400/8410

Autosampler when attached to the 3900 GC. The parameters include selection of

the sampling syringe size, the penetration depth for sample and solvent wash

vials, the default clean and clean modes, and the injection modes.

Injection Mode

The Injection Mode selection consists of five predefined injection modes:

Standard Split/Splitless, Standard On-Column, Neat, Viscous and Volatile. If any

of these modes cannot satisfy your injection needs, a sixth User Defined mode is

1 2 ... 353 354 355 356 357 358 359 360 361 362 363 ... 596 597

Comentários a estes Manuais

Sem comentários

Axis BTA 2100D Manual do Operador Página 358

Comentários a estes Manuais

Manuais e produtos relacionados com Software Axis BTA 2100D