Axis BTA 2100D Manual do Operador descarregar pdf (Página 384)

100

101

382

Item Description

RunTime The elapsed time since the start of the run.

EndTime The time when the AutoSampler Method will end.

Mode Standard or SPME. Standard is used with liquid sampling

syringes. SPME is used with Solid Phase MicroExtraction

fibers and holders.

Status light Shows the state of the AutoSampler. When the AutoSampler is

ready to prepare and inject a sample, the light is green.

Otherwise, it is red.

Fault/No Fault

light

Shows whether the AutoSampler has faults that have not been

cleared. The light appears green when the AutoSampler has

no uncleared faults; otherwise it appears red.

Vial 1 - 48 with standard sample vial tray.

1-12 with large sample vial tray.

Name Shows the sample name for the currently active sample in the

Active SampleList.

Location Shows the vial number of the currently active sample.

Injection "m" of "n"

where

m = 1 - 9

n = 1 - 9

Shows the current injection number and the total number of

programmed injections of the current sample.

Activity Lists the operation that the AutoSampler is currently doing.

Inject… Starts the AutoSampler Method section and begins execution

of its sample preparation and injection programs. If the

AutoSampler is designated as the Instrument's Autocontrol

Module, the AutoSampler Method will start without the use of

this button.

Reset Terminates the AutoSampler Method section; clears all faults.

Used to stop the AutoSampler Method, return the AutoSampler

state to Ready, and continue with the next automated run. To

prevent sample carryover, the Reset command will not prevent

the AutoSampler from performing and completing the Final

Rinse cycle of an injection.

Advance Advances the AutoSampler to the next state or step of an

automix routine.

Method... Invokes the Method Builder and displays the AutoSampler's

Configuration page of the active Method. The AutoSampler's

programmable parameters may then be modified.

Hide/View

Keypad

Toggles between hiding and showing the keypad. Used to hide

or display the keypad in order to enlarge or reduce the size of

the AutoSampler Carrousel Display.

Run Vial Check Searches the AutoSampler carrousel to determine which vials

are present. Used to update the AutoSampler Carrousel

Display

Hardware Displays the Hardware Dialog Box. The Hardware Dialog Box

allows the VarianWS 8200 AutoSampler hardware settings to

be set to match the hardware installed in the AutoSampler.

1 2 ... 379 380 381 382 383 384 385 386 387 388 389 ... 596 597

Comentários a estes Manuais

Sem comentários

Axis BTA 2100D Manual do Operador Página 384

Comentários a estes Manuais

Manuais e produtos relacionados com Software Axis BTA 2100D