Axis BTA 2100D Manual do Operador descarregar pdf (Página 306)

100

101

304

graphical representation of the 8400 or 8410 Carrousel. This display graphically

shows which vials are to be sampled, which vials have been sampled, which vial

is currently being sampled.

Below these display areas is the Chromatogram display. A selection box above

the chromatogram allows you to select the channels for which you want to view

the realtime chromatogram.

3800 Operation Display

The 3800 Operation display is in the left portion of the 3800 Status and Control window.

Item Description

Runtime Shows the elapsed time in minutes since the beginning

of the run. The maximum run time is 999.99 minutes.

Endtime Shows the time at which the run will end.

State Ready, Running, Stabilizing, Equilibrating, Computing,

Needs Monitor, Monitoring, Sampling, Connecting, or

Not Ready

Shows the state of the GC. The light appears green if

the GC is Ready or Running. Otherwise, the light is red.

Fault/No Fault indicator No Fault (green light) or Fault (red light).

When a hazardous or disabling fault occurs, any run in

progress will halt and the affected component will shut

down. If the fault is recoverable, then the run is not

terminated.

Valves Displays the 3800 GC valve status. A plus sign (‘+’)

precedes the valve number if its state is energized. A

minus sign (‘-‘) precedes the valve number if the valve is

in the default state or if the valve is unused.

Start If the system is Ready, starts the GC Method and sends

a start signal to the GC. Equivalent to pressing Start on

the front panel of the GC. The Start button is disabled

unless the 3800 GC is in the Ready state.

Reset Resets the GC, advancing it to the next state. If it is

RUNNING, the GC aborts the current run, goes to the

READY state, and continues with the next injection in

the Sequence. Equivalent to pressing Stop on the front

panel of the GC.

Method… Opens the Method Builder application for editing the

active 3800 GC method.

1 2 ... 301 302 303 304 305 306 307 308 309 310 311 ... 596 597

Comentários a estes Manuais

Sem comentários

Axis BTA 2100D Manual do Operador Página 306

Comentários a estes Manuais

Manuais e produtos relacionados com Software Axis BTA 2100D