Axis BTA 2100D Manual do Operador descarregar pdf (Página 75)

100

101

Click Show Keypad to display the keypad.

Status and Control Window

You are now ready to program the GC/MS to perform fully automated data

acquisition. Initially the MS Module Window will look similar to the figure below. If

you do not see this screen, go to the pull down menu labeled Instrument, and

select the item “Saturn GC/MS”.

The upper left side of the window shows the ion trap schematic, which allows the

ion trap to be turned on. If the trap is displayed in red, it is currently disabled. The

trap is disabled if the current segment is a filament/multiplier delay segment, one

with an ionization mode of none, or if a fault has occurred. If the ion trap icon is

not currently disabled, clicking in the center of the ion trap will turn on the trap.

The black schematic will turn green to denote that it is on, as displayed below.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 596 597

Comentários a estes Manuais

Sem comentários

Axis BTA 2100D Manual do Operador Página 75

Comentários a estes Manuais

Manuais e produtos relacionados com Software Axis BTA 2100D