Axis BTA 2100D Manual do Operador descarregar pdf (Página 367)

100

101

365

Item Description

Col Oven Setpoint Abient+5 °C to 450 °C

Displays the column oven

programmed temperature setting in

the active method.

Col Oven Actual Abient+5 °C to 450 °C

Displays the actual temperature of the

column oven at the 3900 GC

1177 Setpoint 50 to 450 °C

Displays the 1177 injector oven

programmed temperature setting in

the active method.

1177 Actual 50 to 450 °C

Displays the actual temperature of the

1177 injector oven at the 3800 GC.

Oven Status Display

Oven Parameters:

Item Description

Column Ready Yes or No.

The column oven is Ready (Yes) if the setpoints have

been achieved and stabilized. The column oven is Not

Ready (No) if readiness to start a run has not been

achieved or if, during a run, the oven becomes not ready

or goes “out of tolerance”. Some reasons the GC may go

Not Ready during a run are: the temperature program is

too aggressive, the oven door is opened, the coolant

runs out, the power line voltage drops, etc.

Column Fault Yes or No.

Displays if a fault in the column oven component has

occurred.

Injector Ready Yes or No.

The injector oven is Ready (Yes) if the setpoints have

been achieved and stabilized. The injector oven is Not

Ready (No) if readiness to start a run has not been

achieved or if, during a run, the injector becomes not

ready or goes “out of tolerance”. .

Injector Fault Yes or No.

Displays if a fault in the injector oven component has

occurred.

1 2 ... 362 363 364 365 366 367 368 369 370 371 372 ... 596 597

Comentários a estes Manuais

Sem comentários

Axis BTA 2100D Manual do Operador Página 367

Comentários a estes Manuais

Manuais e produtos relacionados com Software Axis BTA 2100D